Beautify Room With Wallpaper

wallpaper home

When you are bored with the atmosphere of the interior of the house, it may be time to replace the wall paint color or a more practical decorate with wallpaper.

Just as the function of paint, wallpaper can beautify the room, evoking the atmosphere as desired homeowners, as well as make the room more spacious or bright memorable. Besides the advantages of wallpaper is presenting a variety of colors at once, instead of paint is usually only one color.

Here are four motif wallpaper to beautify your home room

1. Texture Pattern

Motif texture can give the impression of a warm, open, and spacious in a room. Motif texture that is often used is usually brightly colored and natural wood color as the horizontal direction.

2. Florals

Florals can deliver classic impression on your room. However, to use bright flower color with flowers the size of the big ones should be used on one wall only. Conversely, if the color is softer with a smaller flower pattern can be applied to the whole room.

3. Geometric Pattern

Geometric patterns such as triangles and a mix of rectangular shape with a combination or monochrome shades and bright colors give the impression of masculine room. Or if you want a more modern touch could use shades of white, cream or pastel.

4. Art Pattern

Not just a wall of separation between rooms, but can also be used as an art installation. Art motifs can be used as a focal point in a room. Art motifs are also very suitable for artists or art-minded person who wants to show his work by hanging or put it on the wall.

8 Tips on Cleaning Window

cleaning window

When was the last time you clean the windows of the house? Three or even more than six months ago? In addition to flurry that takes time to clean the house, sometimes stubborn stains make us reluctant to start this one activity.

In fact, the clear window of the house will give reflections clear view more leverage at the same time reflect light into the room. Well, before you start cleaning the windows, consider cleaning the house cleverly eight tips below.

Clean the window with a sponge

A mixture of warm water and liquid soap is known as a powerful cleaning formula. But you have to remember, a little foam will be better. You should also be careful when using liquid glass cleaner containing harsh chemical content. Make sure the fluid does not damage the paint on the frame of the window.

Air Wipe with Squeegee

Use a squeegee to wipe clean the glass window with S pattern reversed from top to bottom window. For maximum net proceeds, before repeating the subsequent rinsing, wipe the tip of a squeegee using a cloth. This is done to remove dirt so that no re-stick.

Drain the remaining water in the glass

To remove residual water clinging to the glass, use a microfiber cloth or a damp cloth. After that, dry the bottom of the window to remove residual water droplets.

Clean Window On Cloudy Day

Although sunlight make it easier to see the dirt more clearly, but the light makes the windows to dry out too quickly. After that will appear scratches on the glass that makes repetitive work should be done. Choose a cloudy day with a humid climate for your cleaning session (but if you are doing outside, exposed to rain alert!).

Clean Window At least Twice a year

Clean the glass window once every six months would give a thorough change. You will be surprised to see the room becomes brighter and realize how dirty the window glass if not cleaned.

Creating Your Own Cleaning Agents

It is very easy, simply add two tablespoons of vinegar into a small bucket of warm water. Use to clean glass without damaging the paint and cause a lot of foam.

For Window Really Dirty or Dry

For stubborn stains, use two tablespoons of ammonia or borax domestic mixed with a large bucket of water as the cleaning liquid. Afterwards, rinse with vinegar cleaning formula above. Finally, wipe the glass with a dry cloth.

Dry Cleaning Glass

When the glass looks pretty clean and you just want to clean without using water, use a wad of old newspapers as a cleaner. Her existing printer inks will give extra sparkle in the glass.

*Window Squeegee is a similar tool blade made of rubber which serves to clean the window glass or the like. Window Squeegee can help facilitate the process of cleaning the glass windows, storefronts and others. Help remove dirt, stains and dust on the surface of the glass.

Best Ways to Clean Stainless Steel

clean stainless steel

You certainly have the goods made from stainless steel. For example, as utensils in the kitchen, there must be made from stainless steel.

Utensils made of stainless steel if in pristine condition is very pleasant to look at. But, unfortunately, if there is already a stain attached, utensils made of stainless steel is not easy to be cleaned.

If you apply the wrong method, it will result in damage to your stainless steel. To be safe, you can apply some of the following ways:

  • To cleansing routine you can use warm water and a clean cloth. It’s the safest way to clear goods made from stainless steel, and sometimes this becomes the most effective option in many situations.
  • One thing to note when cleaning using water, make sure after you blow-dry with a clean cloth, so as not to leave the water stain.
  • To clean stainless steel that has a stain rather a lot, you can use a liquid cleaner that is gentle. Add warm water to the cleaning fluid, and then clean your stainless steel. This could be a pretty effective way to clean stainless steel without destroying it.
  • If there are stains that are difficult to remove, you can use a formula mixture between a mild detergent in warm water. Make sure that once cleaned with liquid soap or detergent rinse so that you do not leave marks or stains.
  • When you are dealing with a case, there are stains that really stubborn and difficult to clean or scratch there are stains, use special cleaners for stainless steel into the most appropriate choice. Several special cleaners have the ability to minimize stain resistant and removes stains are difficult to remove.

Introducing the Cable TV Equipment

rf combiner werlatone

If you want the cable TV business, there are some hardware components that you should know the following with its function. Because the choice of equipment with good quality, give satisfaction to every customer.


Parabola is an important part to capture signals from satellites, in the parabola are important components as an antenna that LNB, while the aluminum parts as a reflector signal from the satellite, then focused to lnb.


Receiver is an equipment that will serve to change the signal that was obtained lnb, into digital video and audio by frequency and polarity of each channel broadcast TV, the receiver is used for one channel, if you want to distribute ten channels, means there should be ten receivers provided.


The modulator is used to convert video and audio signals from the receiver into rf signal, there are several types of mode modulator that can be used and be an option,


Combiner is an equipment that serves to incorporate some of the signal coming out of the rf modulator rf signals into a single output that will be distributed to homes, RF combiner tool with good quality as the product of Werlatone.


Booster / amps are useful to enhance the signal, the signal strength could decline due to loss of the cable used, its distance away, in order to remain strong signal booster amplifier is used


Splitter tool used for branching, almost the same as the hub switch on the LAN, without using a splitter can, for quality that cable TV networks are neat and avoid noise, we recommend using splitrer.


Coaxial cables are used to transmit broadcasts to homes using 75 ohm coaxial cable, coaxial good and right in the installation of cable television coaxial cable RG 6.

Some types of drill bits and function

carbide micro bits

There are several types of drill bits for different occupations. Workpiece material can also affect the type of drill bit used. Some form of drill bit specific to particular workmanship. The use of each of the following drill

1. The drill large helix (high helix drills): the drill has a large helix angle, thereby increasing the efficiency of cutting, but the trunk is weak. The drill is used to cut soft metal or material having low strength.

2. The drill small helix (low helix drills): a drill bit with a helix angle smaller than the normal size is useful for preventing chisel drill lifted up or held in check the workpiece when making holes in brass material and similar material.

3. Drill bit heavy work (heavy-duty drills): drill bit used to withstand high voltages by way of thickening the web part.

4. Drill bits left hand (left hand drills): standard drill bits can be made also to the drill bit left. Used in the manufacture of a plural hole where the head is designed with a simple drilling machine which allows rotating in opposite directions.

5. Slice drill bit with straight sides (straight flute drills) is an extreme form of a helix drill bit small, is used to make a hole in the brass and the plate.

6. The drill crankshaft (crankshaft drills): drill bit designed specifically to work on the crankshaft, it is very advantageous to make a hole in the resilient material. Having a thick web and helix angles are sometimes larger than the normal size. The drill is a special drill bit that is widely used and become standard drill bits.

7. The drill length (extension drills): This drill has a stem / long shank that has been tempered, used to make holes on the surface that would not normally be able to reach

8. Extra long drill bit (extra-length drills): the drill with a long chisel body, to make a deep hole.

9. The drill-rise (step drills): one or two diameters of drill bit made in the trunk to make a hole with a diameter of terraced.

10. The drill double (subland drills): the same function with the drill-rise. The drill looks like two drills on one stem.

11. Solid carbide bits: to make a small hole in the lightweight alloy material, and the material instead of metal, the shape can be the same as a standard drill. The process of making the holes with the drilling of this there should be no shock loads, because the carbide material easily broken.

12. The drill with carbide inserts (carbide tipped drills): carbide inserts are used to prevent wear and tear due to high cutting speeds. Smaller helix angle and a thin web which is applied to increase the rigidity of the drill bit, which maintain the durability of carbide. The drill is used for hard materials, or non-metallic material is abrasive.

13. The drill holes (oil hole drills): a small hole in the drill chisel blade can be used to drain the lubricant / coolant pressure to the tip of the drill bit. The drill is used to bore holes in the clay material.
The drill flat (flat drills): rod straight and can be grinded edges forming the tip of the drill bit. It will provide a great space for burr without helix section. The drill is used to bore holes in the railroad.

Tips on Selecting the Right LED lights for the room

led lights for room

In the past, the LED light is one type of artificial light used for computers, mobile phones, and other electronic equipment. As it grows, the type of the lamp has been widely used so it lights a room.

LED lights are now much in demand as a substitute for regular bulbs. This is because of the many benefits of LED lights, when compared to regular lights. One of them is the light quality is much better and at the same time saving energy.

The advantages of LED lights are being developed constantly and offers a lot of interesting things for the lighting of the room. For example, the light emitted is not hot and does not contain ultraviolet, long durability, and much more.

But unfortunately, this type of lamp is still relatively more expensive than other types of lamps. So, if you are interested in using LED lights in a room, try to see some tips on choosing the right following:

1. Brightness

When buying an ordinary lamp or any other kind, we are accustomed to seeing the number of watts to determine the level of brightness. But there is a different thing to note, the number of watts of LED lights is less than other lamps.

For example, the LED light with about 8-12 watts with brightness equivalent to 60 watt standard bulb. In addition, it should be understood to measure the brightness of the LED lights should be to check the number of lumens instead of watts.

3. Use Expert Services

This type of lamp is still relatively new, so it would be very good if you use the services of an expert or a professional. They will help you choose and use the most appropriate to use LED lights in your room.

Involving experts also make an appearance LED lights do not just emit light. But also make the room look more luxurious and beautiful. LED lights also are still widely used as an accessory lights to beautify the particular room.